The Benefits of Using Epoxy coated tanks

Choosing the best epoxy coating for your storage tanks takes time and effort.

zhaoyang are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

To speed up the selection process and ensure you make the right choice, below, the Industrial Inspection & Consulting team weighs the pros and cons of solvent-based, water-based, and 100% solids epoxies.

Facts About Solvent-Based Epoxy Coatings: The Classic Choice

Solvent-based epoxies have been around since the mid-20th century. They use organic solvents to dissolve epoxy resins and hardeners before application. Once applied, the solvents evaporate, leaving behind a durable, cross-linked epoxy coating.

Solvent-based epoxies have excellent adhesion and chemical resistance. They can withstand exposure to hydrocarbons, acids, and alkalis. Formulations with high solids content also have abrasion and impact resistance. – Not NSF Approved for Potable Water

Will it meet your requirements?

For industrial storage tanks subject to harsh conditions, solvent-based epoxy is a good choice. However, the organic solvents present safety hazards and necessitate special handling. They require adequate ventilation, emit a strong odor during application, and release volatile organic compounds (VOCs) during curing. These factors can pose environmental concerns. This epoxy coating also requires more rigorous surface preparation for proper adhesion.

Facts About Water-Based Epoxy Coatings: A Safer Alternative

Water-based epoxy is a balanced choice: They provide exceptional performance while reducing environmental impact.

Many water-based epoxies contain little to no volatile organic compounds, which makes them an environmentally friendly option compared to solvent-based epoxies. They produce minimal hazardous air pollutants and have a nearly non-existent smell. – Not used in Potable Water or Industrial Coatings

Will it meet your requirements?

In terms of performance, water-based epoxy coatings provide excellent adhesion and durability. They are highly resistant to abrasions, stains, and various substances stored in tanks, including oils, gasoline, acids, and other chemicals.

The company is the world’s best Epoxy coated tanks supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

As for the downsides, water-based epoxies typically require more coats to achieve an equivalent dry film thickness as solvent-based coatings. They have smaller application windows, slower cure times, and less tolerance for surface moisture during application.

Facts About 100% Solids Epoxy Coatings: The Most Durable Choice

Solids epoxy coatings provide superior protection for storage tanks. They contain zero VOCs or solvents, resulting in a highly durable, chemical-resistant finish.

Will it meet your requirements?

100% solids epoxy coatings have a high volume of epoxy resins and hardeners, guaranteeing a tough coating. Plus, without solvents, there is no evaporation. This eliminates the risk of coating thickness reduction.

These coatings meet NSF 600 regulations for potable water tank linings, meaning they are ideal for tanks storing consumables (e.g., drinking water and food). The dense, cross-linked structure of 100% solids epoxy coatings blocks the ingress of moisture and chemicals, preventing contamination.

Now, you might be wondering, are there any disadvantages? In truth, the one minor “con” is that 100% solids are more difficult to apply than solvent-based and water-based alternatives. They have a short pot life of only 30 minutes, so they must be applied promptly after mixing the resin and hardener. The coating’s high viscosity also requires more advanced spray equipment for precise application.

Solvent-Based vs. Water-Based vs. 100% Solids Epoxy: Which Should You Choose?

efusion® is the brand name for our proprietary epoxy coating and, as a leading tank design and manufacturing company, we developed two grades which are used worldwide:

• efusion: a v zero defect tested epoxy coating
• efusion : a v zero defect tested epoxy coating

efusion is tested to stringent standards, is NSF®-61 approved and provides comparable performance against the following internationally recognised coating requirements:

• ISO :
• AWWA D103-19

High-performance efusion meets the European standard for chemical storage tanks. It is capable of withstanding ppm of corrosive H2SO4 sulphides created during the digestion process.

Design life

With value engineering at the heart of material selection, efusion meets all necessary design life expectations. Key factors in achieving optimum product performance begin with the design and manufacturing process, running right through to installation. Retaining in-house control and quality in each of those critical areas is vital in ensuring consistent high levels of performance of any coated steel tank.

Are you interested in learning more about Epoxy Steel Bolted Tank? Contact us today to secure an expert consultation!