Everything You Need to Know About Scaffolding and Formwork ...

Formwork Accessories

Formwork Accessories are parts and components for construction concrete form works and shuttering, including Tie rod accessories, concrete formwork clamps and clips, shuttering accessories, and formwork system parts.

If you want to learn more, please visit our website Zolo.

Tie Rod System Accessories

Accessories, nuts, and couplings that work with the steel tie rods to stabilize formwork concrete pouring provide secure and reliable connections.

• Concrete Tie Rods (Including D16 and D20)
• Dywidag Bars
• Tie Rod Wing Nut
• Anchor Nuts with Round Ring
• Combi Nut with Pivot Plate(swivel dome nut)
• Water Stoppers
• Formwork Waler Plates
• Spring Clips
• Rapid Clamp

Concrete Formwork Clamps and Clips

Concrete formwork clamps and clips are accessories used to fix formwork panels in positions for slab formwork, wall formwork, column formwork, and beam formwork.

• Formwork Clamps
• alignment clamps 
• Wedge Lock
• Tekko Clips
• Wedge Bolt and Wedge Pins
• Adjustable Column Clamps
• H20 Beam Flange Clamps

Concrete Shuttering Accessories

Shuttering accessories are parts designed to support and secure formwork and ensure precision in the concrete mould during pouring.

• Adjustable Shuttering clamps 
• Shuttering plates
• Shuttering brackets
• Wedges and Ties

Formwork and Shoring Parts and Components

Formwork system parts are panels and props used for framing and shoring in your formwork systems, like formwork panels, steel props, brackets, etc.

• Formwork Panels: Steel Panels (including steel and steel-ply) and Aluminium panel
• Formwork Props
• Formwork Brackets
• Push Pulls
• Trench Struts
• H20 Beams
• Aluma Beams (aluminium beams)
• Formwork Bases

Accessories for Different Formwork Systems

In construction, there are four main types of formwork systems:

1. Column Formwork
2. Wall Formwork
3. Slab Formwork
4. Beam Formwork

Column Formwork System Accessories

Column formwork is a formwork used to form building columns. According to the column formwork shapes, there are round-type and square-type column formworks.

Column formwork components include:

• Formwork Walers(Steel or Timber)
• Formwork Plywood
• Formwork Panels
• Formwork Inside and Outside Corners

The column formwork components are fixed and connected by the column formwork accessories. You can use the following formwork accessories for your column formwork construction:

1. Shuttering Clamps ( C Clamps)
2. Cast Adjustable Column Clamps
3. Concrete Tie Rod
4. Concrete Wing Nut and Waler Plates
5. Formwork Anchor Nuts
6. Formwork Water Stopper
7. Formwork Double Walers
8. Formwork Sleeves
9. Formwork Cones
10. Formwork Hex Nut

Wall Formwork System Accessories

Wall formworks are systems of shuttering materials used to form construction walls.  Wall formwork components include:

• Push-Pull Props
• Formwork H20 Wood Beams
• Formwork Strongbacks
• Formwork Corner Brackets
• Formwork Panels (Steel, Aluminium, and Wooden Type)
• Formwork Film Faced Plywood

During the wall formwork construction, you need to use the following formwork accessories:

1. Formwork Alignment Clamps
2. Forged or Cast Wedge Clamps
3. Concrete Tie Bars
4. Water Stopper
5. Formwork Wing Nut and Waler Plates
6. Formwork Anchor Nuts with Round Plates
7. Dome Nut (Combination Nut)

The wall formwork accessories need to be universally used in all types of wall formwork systems. Include GW 120 heavy-duty steel plywood formwork systems, Euro Form systems, Aluma and aluminium formwork systems, etc.

In the wall formwork system, forged formwork clamps are most used. It is more durable compared to the cast formwork accessories. In addition, forged formwork accessories can take more load from the concrete.

Slab Formwork System Accessories

Slab formworks form building floors or slabs in construction concrete and shuttering. Shuttering accessories used in slab formwork include

• H20 Beams
• Steel Hollow Section Beams
• H20 Flange Clamps
• Phenolic Plywood
• Adjustable Forkhead Jacks
• Formwork Fixed Forkhead
• Infill Beams(Secondary Beam)
• First (Main)Beams(Decking Beam)
• Universal Jacks
• Socket Base Plate
• U Head and U Head Jacks

Slab formwork accessories can be compatible with all formwork shoring systems. Include ringlock scaffold shoring system, kwikstage scaffold shoring system, cuplock slab formwork system, quick lock slab scaffold system, adjustable steel props, etc.

To support thick slabs in the concrete, you must use heavy-duty scaffold systems to take more bearing from the slab concrete. Thus, you can use heavy-duty scaffold systems, like OD60mm ring lock shore systems, crab 60 scaffolding shore, shoring frames, heavy-duty post shore, etc.

No matter which type of slab shoring system. Wellmade slab formwork accessories can connect them well to form the slabs.

Beam Formwork System Accessories

Beam formwork is a type of formwork used to form the building beams.  Beam formwork is always used together with slab formwork.

Beam formwork accessories include:

1. Adjustable Scaffolding Props
2. Timber, Aluminium, and Steel Formwork Beams
3. Formwork Beam Fixing Clamps
4. Fixed Forkhead and U Head
5. Film Faced Plywood

Accessories for Metal Modular Formworks

Modular formwork is a prefabricated metal formwork system with standardized panel sizes. It reduces the cutting, shaping, and forming of formwork material at the project site.

There are three types of metal modular formwork systems:

1. Steel Formwork System
2. Steel Ply Formwork System (Include Euro Form Formwork)
3. Aluminium Formwork System

Steel Formwork Accessories

Steel formwork is made from steel plates or steel structures.  The steel formwork panels’ width ranges from 100mm to 600mm.  The length of steel formwork lengths are 600mm to mm.

Wellmade Steel Formwork Modular System Catalogue Download

Steel formwork panels are designed with holes on four sides of formwork panel edges. It is always in 14mm diameter.  The steel formwork holes are used to connect the formwork accessories.

Formwork U clips and form ties are the main formwork accessories for the steel modular formwork system.

For more information, please visit Scaffolding Accessories.

Formwork u clips are always in 12mm diameter. They are used to fix between two steel formwork panels, corners and angles in the concrete forming.

Formwork form ties a set of formwork accessories, such as butterfly nuts, wing nuts, and concrete tie rods. To match the steel formwork panel holes(14mm), the form tie system is in 12mm diameters.

Steel-Plywood Formwork Accessories

The steel ply formwork is the best. It is integrated with steel formwork frames and plywood panels. Features:

1. Steel ply formwork is less weight than steel formwork
2. Steel ply formwork system takes more weight from the concrete compared to aluminium formwork
3. Steel ply formwork can be used more than any other modular formwork system.

Wellmade’s steel-ply formwork systems include GW120 heavy-duty steel-ply formwork for large-scale construction concrete and 63.5mm Euro Form formwork systems.

GW120 HeavyLarge Formwork System Accessories

GW 120 heavy-duty extensive formwork system is a German formwork steel ply formwork system. The GW120 formwork system steel frames are made of high-strength steel profiles in 120x60mm. The GW 120 heavy dut formwork system panels are made of 18mm film-faced plywood.

GW120 Large Formwork Catalogue Download

GW 120 large steel ply formwork system includes formwork accessories:

1. Alignment clamps(universal clamp)
2. D20 dywidag tie bars(tie bolt)
3. D20 wing nut with plates(coupling nut)
4. Formwork double waler with hooks and anchor nuts(strongback)
5. Formwork Quick Acting Clamps (Wedge Lock)
6. Formwork Multi-function Clamps
7. Formwork Bracket
8. Formwork Lifting Hooks
9. Single  Push-Pull Props(Panel Struts)
10. Double(Two Level) Push Pulls (with Long and Short Props)

63.5mm Euro Form Formwork Accessories

Wellmade manufactures 63.5mm lightweight euro form formwork, too. It is a type of Korean steel ply formwork system. The euro form steel-ply formwork system panels and corners, angles are with rectangle holes. Euro-form accessories connect the euro-form formwork panels through the rectangle edge holes.

63.5mm Euro Form Formwork System(Steel Ply Formwork) Catalogue Download

Euro form formwork accessories include:

1. Big Wedge Pins(85mm)
2. Small Wedge Pins(79mm)
3. Wedge Pins 100x5mm (For USA & Colombia)
4. Big Round Hooks
5. Small Round Hooks
6. Big Square Hooks
7. Small Square Hooks
8. Flat Ties
9. Euro Form Steel F Bar Profiles

Euro form formwork system accessories can be finished in black(self-finished), silver-painted, or zinc-plated. All euro form accessories are made from high-strength 450 steel grade steel plates.

Aluminium Formwork Accessories

Wellmade aluminium formwork is made with high-strength aluminium profiles. It is lightweight and easy to handle in the concrete shutter. The aluminium formwork panels are durable and without rust. Thus, Wellmade aluminium formwork systems are widely required in all construction concrete forming types.

Aluminium Formwork System Catalogue Download

Aluminium formwork needs unique formwork accessories for assembly. Include:

• Flat Ties
• Wedge and Pin
• Wailer Clamps
• Double Walers
• Single Wailing
• Tie Rod
• Waler Plates
• Short Strut
• Double Level Brace

Contact Us to Order Your Formwork Accessories Now.

Formwork Accessories and Hardware For Sale

Concrete Tie Rods & Accessories

You can find tie rods and dywidag bars in all sizes for your formwork system in Wellmade.

Galvanized and Black Steel Type. Dywidag Heavy Duty Hot Rolled and Normal Duty Cold Rolled Tie Rods

Wing Nut & Achor Nuts

Formwork Clamps

Form Ties

Square Tube Beams and Steel Panels

H20 Wood Beams

Film Faced Plywood

You can find Wellmade Film Faced Plywood With Black and Brown Film for Your Concrete Formwork System.

The thickness of the FilmFaced Plywood is 12mm-25mm. Normal Size x , 914xmm etc

Wedge Clamps

CodeItemsSizeWeightFinishing WWC-SStandard Rapid Clamp105 x 40mm 0.43KGPainted/Zinc-plated WWC-MMayo Rapid Clamp120 x 50mm 0.55KGPainted/Zinc-plate

Rapid Clamps

CodeItemsSizeWeightSurfaceWRC-SStandard Rapid Clip110 x 75mm 0.41KG Painted/Zinc-platedWRC-LSuper Rapid Clip120 x 75mm0.52 KGPainted/Zinc-plated

Concrete Dywidag Hex Nut D15

 Code Items&DescriptionSize Weight SurfaceWHNmm(L) Hexagonal Nut30 x 30mm0.15KGSelf&GalWHNmm(L) Hexagonal Nut 30 x 45mm0.21KGSelf&GalWHXmm(L) Hexagonal Nut 30 x 50mm0.23KGSelf&GalWHXmm(L) Hexagonal Nut 30 x 70mm0.30KGSelf&GalWHXmm Connection Sleeve 30 x 90mm0.39KGSelf&Gal

Hex Nut for D20 Dywidag Tie Rods

CodeItems&DescriptionWeightSurfaceWHNmm Hex Lock Nut D20,0.20KGSelf|GalWHNmm Hexagonal Nut D200.23KGSelf|GalWHNmm Hexagonal Nut D200.33KGSelf|GalWHNmm Hexagonal Nut D200.46KGSelf|GalWHNmm Connection Sleeved D200.94KGSelf|Gal

Wing Nuts for D15 Dywidag Tie Bars

 CodeItems&DescriptionWeightSurfaceWWND15 Tie Rod Wing Nut 01, Malleable Cast Iron, FCD 450.27-0.60KGBlack|Gal

Waler Plate (Washer Plate)

CodeItem&DescriptionSize(mm)WeightSurfaceWPx100mm Washer Plate100×.39KGdGalvanizedWPx110mm Washer Plate100×.47KGGalvanizedWPx120mm, Washer Plate100×.57KGGalvanizedWPx140mm, Washer Plate100×.93KGGalvanizedWPx150mm, Washer Plate100×.06KGGalvanizedWPx180mm,Washer Plate100×.53KGGalvanizedWPx200mmWasher Plate100×.15KGGalvanized

Concrete Anchor Nuts

CodeItemTypesWeightSurfaceWACH12D 12mm Rebar Anchor Nut2 Wings&3 Wings0.3-0.9KGGalvanizedWACH15D 15mm Rebar Anchor Nut2 Wings&3 Wings0.4-0.65KGGalvanizedWACH20D 19mm Rebar Anchor Nut2 Wings&3 Wings0.6-0.9KGGalvanized

Swivel Combi Nut With Pivot Plate

CodeItemSizeWeightWDN115-CCast Washer Dome Nut115x115mm1.0-1.2KGWDN115-PPressed Washer Dome Nut120x120mm1.0-1.2KG

Combi Dome Nut

Code Items&DescriptionWeightFinishing WDN01 D15/17mm Dome Nut 1, Malleable Cast Iron, Zinc-plated1.25KGBlack|Zinc-plated WDN02 D15/17mm Dome Nut 2, Malleable Cast Iron, Zinc-plated 1.27KGBlack|Zinc-plated WDN03 D15/17mm Dome Nut, Malleable Cast Iron, Zinc-plated 1.32KGBlack|Zinc-plated WDN04D15/17mm Dome Nut 1, Cast Iron Wingnut
Pressed Washer Plate
Zinc-plated 1.27KGBlack|Zinc-plated

Plastic Tube (PVC Sleeves)

Formwork sleeves are PVC sleeves that fit a 15mm threaded tie bar system. Following are the formwork sleeve accessories specifications:

1. Inner Diameter: 22mm
2. Outer Diameter: 25.4mm
3. PVC Sleeve Wall Thickness: 1.7-2mm
4. Material: Smooth PVC, Rigid
5. Colour: Black or Grey
6. Length: Customized

PVC Cones

The formwork cone is a PVC plastic cone used at both ends of the plastic tube. It is one component of the D15mm threaded tie rod system. It will be assembled with the formwork PVC sleeve in the concrete. Following is the formwork PVC cone accessory size and specifications:

1. Overall Length: 27mm
2. Length of Angled Section:12.0mm
3. Length of Straight Section: 15.0mm
4. Inner Diameter : 19.0mm
5. Top Outer Diameter: 21.5mm
6. Bottom Outer Diameter: 44.0mm
7. Colour: Black or Grey

Manufacturing Video – Peri Adjustable Clamps

Quality Control – Ultimate Load Capacity Test

Wellmade Control controls our concrete forming and shoring products and components according to the ISO management system. We test the hardware, accessories, and parts and ensure they are qualified before shipping and exporting them to you.

Bring You Competitive Factory Price

Wellmade is a leading factory for the formwork and shuttering products. We are able to bring you not only qualified and safety products, but also competitive prices.

Industries We Serve

We provide high-quality formwork accessories to sectors such as:

• Commercial Construction
• Residential Development
• Infrastructure Projects
• Industrial Builds
• Bridge and Tunnel Construction

Customer Testimonials

• “We’ve been working with Wellmade Group for years. Their formwork accessories are always top-notch, and. the service is exceptional” – David W., Project Manager.

• The quality of the concrete formwork accessories we ordered from Wellmade Group was outstanding, and they arrived exactly when we needed them. – Li Z., Site supervisor