achromatic optics – lens doublets, apochromats ... - RP Photonics

Definition: optical devices or setups with minimized chromatic aberrations

With competitive price and timely delivery, optec sincerely hope to be your supplier and partner.

More specific term: apochromatic optics

Category: general optics

Page views in 12 months:

DOI: 10./kwr   Cite the article: BibTex plain textHTML   Link to this page!   LinkedIn

For purchasing achromatic optics, use the RP Photonics Buyer's Guide – an expert-curated directory for finding all relevant suppliers, which also offers advanced purchasing assistance.

Definition of Achromatic Performance

Achromatic optics are optical devices or setups which have been optimized such that chromatic aberrations are minimized, such that they can be used in a wide range of wavelengths. Most frequently, this refers to optical lenses or objectives, which are essentially combinations of several lenses. Achromatic optical lenses are often just called achromats. The property of being achromatic (essentially insensitive to wavelength changes) is called achromatism. Achromatic optics, in particular doublet and triplet achromatic lenses, have been invented and used already in the eighteenth century, and are very widely used in modern optical technology.

Designing Achromatic Optical Elements

As the article on chromatic aberrations explains, frequently used parameters are based on refractive index values at certain reference wavelengths. From these, one calculates Abbe numbers such as ($V_\textrm{D}$) or ($V_\textrm{d}$), which then appear in various formulas for calculating the strength of chromatic aberrations. Such equations allow one to calculate parameter combinations (e.g., concerning used materials, curvature radii and spacings between optical elements) for which the axial chromatic aberrations are compensated.

Perfect compensation of chromatic dispersion is generally not possible for optical elements where refraction occurs. Typically, the design goal for achromatic optics is to at least have two substantially different wavelengths for which the axial chromatic dispersion is compensated. For example, for a focusing lens this can mean that the axial focus position is the same for these two wavelengths. There are further enhanced elements called apochromats which achieve that compensation for three different wavelengths, or even for four wavelengths in case of some super-apochromats. This usually results in an overall substantially better optical performance over a wide range of wavelengths, e.g. throughout the visible spectrum. Good designs also minimize transverse chromatic aberration effects, which cause color fringes at the edges of the field.

Example: Achromatic Doublet Lens

As an example, we consider chromatic aberrations of a lens. A first simple version is an ordinary (non-achromatic) biconvex singlet lens made from BK7 glass, with curvature radii of 103 mm on both surfaces. The substantial chromatic aberrations of that lens are seen in the following diagram, where it has been assumed that a collimated laser beam with an initial beam radius of 1 mm hits that lens. Obviously, the focus position has a substantial wavelength dependence.

(Note that the use of a biconvex lens for focusing a collimated beam is not ideal in terms of spherical aberrations, but this aspect is not relevant for the current discussion.)

For improving the situation, we can now use an achromatic lens doublet, consisting two parts (see Figure 2): a biconvex lens made of BK7 and concave-convex lens made of SF2 (a flint glass). The basic idea is to realize an overall focusing lens by combining a strongly focusing and a less strongly defocusing lens, where the latter exhibits stronger chromatic dispersion. Although the defocusing effect of the second lens is weaker than the focusing effect on the first one, its chromatic aberrations can compensate those of the other lens.

The considered doublet lens design has been numerically optimized with the RP Resonator software such that we obtain a focal length close to 100 mm (measured from the middle of the lens at ($z$) = 2 mm) in the wavelength range from 400 nm to 800 nm. The curvature radius on the left side has been fixed at 60 mm, and the other two curvature radii were subject to optimization. The inner radii of curvature of the two lenses are required to be the same, so that the two lenses can be contacted (e.g. cemented together), forming a single optical element and minimizing reflection losses. Note that for the given focal length the double lens requires a stronger curvature due to the defocusing effect of the flint lens.

Figure 3 shows the resulting foci; one can see that the focus positions agree quite well for three very different wavelengths.

Figure 4 shows the residual wavelength dependence of the focal length. One can see that the chromatic compensation is good but not perfect.

Other doublet lens designs are flat on one side (plano-concave designs), and one can also realize defocusing achromatic lenses (negative achromats). In some cases, a lens doublet is not contacted, but the two lenses are only placed in a common housing (air-spaced doublets). Furthermore, there are cylindrical lenses designed as achromats.

Additional resources:
10 Questions You Should to Know about flat optical mirrors

Want more information on Double Convex Cylindrical Lenses? Feel free to contact us.

With such a doublet lens design, one can adjust the parameters such that the axial chromatic aberrations exactly vanish for two wavelengths (typically in the red and blue spectral region). By combining three different materials (making aspheric triplets), it is possible to make a so-called apochromatic lens (apochromat), where the chromatic aberrations vanish for three different wavelengths. Although in principle the distortions at other wavelengths are not limited by such conditions, they are typically smaller for an apochromat at least within a certain wavelength range.

In the same way as other lenses, achromats can be optimized for additional requirements such as minimizing spherical aberrations and coma in certain situations, and can be equipped with sufficiently broadband anti-reflection coatings. Also, there are mounted and unmounted achromats.

Particularly high performance in terms of the magnitude of remaining chromatic aberrations can be achieved with superachromatic lens designs, involving fluoride glasses and requiring particularly tight fabrication tolerances.

There are also other types of achromatic lenses, which are based on diffractive optics. Here, the operation principle is entirely different from that of the lens doublets as explained above.

Achromatic Prisms

Optical prisms are often exactly used for obtaining a wavelength-dependent deflection angle for the light beam, i.e., to exploit chromatic behavior. In some cases, however, it is desirable to obtain a certain deflection angle which is about the same for a wide range of wavelengths. Such a performance can be achieved with essentially the same basic approach as for an achromatic lens doublet: one can combine two prisms made from different optical materials, which may be contacted to obtain a single prism.

It is also possible to design composite prisms such that the average deflection angle in some wavelength range is about zero, but a substantial wavelength dependence of that angle is achieved. That is of course not an achromatic design.

Achromatic Waveplates

There are also achromatic waveplates, but in this context a different kind of chromatic distortion is reduced: the wavelength dependence of the optical retardance, i.e., of the difference of the optical phase changes caused for two orthogonal polarization directions. Such devices can be made by combining materials with different chromatic dispersion (e.g. quartz and MgF2), which can have a nearly constant retardance over a very wide spectral range (hundreds of nanometers).

Applications of Achromatic Optics

The main application of achromatic optics (in particular, on a chromatic lenses) is in imaging systems, as needed for photography, microscopy and video recording, for example, as those applications typically involve a broad wavelength range. In many cases, it is not sufficient to use a simple doublet lens; instead, one requires a more complex objective, containing multiple lenses. The typical approach for compensating the chromatic aberrations of such a system is not to build it from achromats only, but rather to find an optical design where only the overall chromatic aberrations are more or less compensated. Of course, chromatic aberrations are typically only one of several types of optical aberrations which need to be minimized, and additional requirements such as a compact design or highlight throughput can make it even more difficult to find a good compromise between all requirements.

Achromatic optics are not only required in the visible spectral region, but also for infrared and ultraviolet light. Particularly strong dispersion is to be compensated in the ultraviolet spectral region, but there are also applications in the infrared where two or more very different wavelengths or a very wide range of wavelengths are involved. For example, achromats are beneficial for focusing or collimating the output of supercontinuum sources or in other cases with ultrabroadband ultrashort pulses.

Use of Reflective Optics

In some applications, it is possible to avoid any chromatic aberrations by using reflective optics instead of lenses. Curved mirrors, which can be used for focusing a beam, for example, are naturally achromatic; this applies even to dielectric mirrors, despite the wavelength dependence of the used multilayer materials.

Related Articles

Questions and Comments from Users

Achromatic cylindrical lenses are ideal for eliminating spherical and chromatic aberration at the image plane, for example using monochromatic light source, achromatic cylindrical lenses can form a 50-90% smaller spot comparing to a singlet lens.

Achromatic cylindrical lenses are typically introduced into system designs for the highest-power laser or imaging applications, such as anamorphic projection and anamorphic photography, Hyperion Optics can manufacture such lenses based on the custom design doublet or triplet achromatic cylindrical cemented lenses by using centering alignment device with UV curing unit, which allows us to process precision bonding and testing simultaneously. Every singlet is fully inspected before bonding.

We are capable of producing achromatic cylindrical lenses up to 150mm in diameter with reliable anti-reflective coatings, centering precisely controlled on the optical edging device, and surface accuracy strictly defined on Zygo. Further, we also help our clients with adopting Chinese CDGM or NHG equivalents in achromatic cylindrical design, offering a flexible and quick-turnaround solution in LRIP cases.

Please check out our anamorphic lenses for more information. If you are in the stage of developing your own anamorphic lenses, don’t hesitate to contact one of our optical engineers for a free consultation to receive design input/ suggestions from the manufacturing perspective.