10 Questions You Should to Know about Deep Processing Woven Wire Mesh

To initiate the industrial mesh buying process, you should reach out and supply the required mesh specification. This includes the length (rolled goods), dimensions (cut-to-size pieces), opening size, wire diameter, and weave pattern.

Click here to get more.

• Here's a complete list of what you will need to get started:
  
  Manufacturer name/trademark
  Nominal wire diameter
  Nominal aperture size
  Weight (when applicable)
  Weave pattern
  Alloy
  Dimensions
  Required tolerances
  Order quantity
  Product label/technical data (for repeat orders)
  
  

While you may not know every specification you need, the more information you supply, the better we will be able to identify if your order fits our scope of work and calculate the logistics required to produce the mesh. Additionally, if you can supply samples of the wire mesh specification you wish to purchase, it can be reverse-engineered and recreated.

You should also provide information that accurately illustrates how the mesh will be used. This allows us to properly understand your needs and deliver a solution that resolves your concerns.

After reviewing your specifications with our engineering team, a quote reflecting all aspects of the order will be sent. If you accept the quote, the final step will be to submit a purchase order.

It's at this point that your mesh will begin being fabricated, with order confirmations, tracking numbers, and fabrication updates being sent to you.

How is Industrial Woven Wire Delivered?

The way in which woven wire mesh is packaged will vary depending on the manufacturer. That said, rolls and cut-to-size pieces are most often shipped in custom pallets.
With rolls in particular,  lengths of 25 or 30 meters, with half lengths of 12.5 or 15 meters are standard. NOTE: These standard lengths are expected to fall within +/- 10% of the invoiced length.

It is important to remember that partial lengths are available. But a roll cannot consist of three pieces, and each roll must reach at least 2.5 meters.

The width of the roll must be greater than the nominal width, up to 2%.

Cut-to-size pieces, of course, are made to order based on the sides, lengths, radi, and angles set by the customer. Regardless of the form factor, woven wire will arrive with a label containing the following information:

• Supplier name/trademark
• Nominal wire diameter
• Nominal aperture size
• Weave pattern
• Material designation
• Size
• Order quantity
  
  

What Will You Recieve With Your Wire Mesh Order?

When your woven wire order arrives at your facility, you should, in most cases, also receive the associated inspection documentation. Based on the amount of testing you mesh underwent, you can expect:

We go into detail

Processes in the wire weaving division

To give you a specific idea of what happens on more than 30,000 m² of production space, we present the most important production steps in our wire weaving division in detail here.

Link to Shengfa

Additional resources:
Questions You Should Know about Woven Wire Mesh

Weaving

What Are the Advantages of Epoxy Mesh？

It starts with in-house design of the weaving looms

As a wire weaving division, processing wires is our core competence. We can produce wire cloth or pre-crimped wire mesh from the following wire thicknesses on our own weaving looms:

• 13 µm to 6.3 mm in Oelde
• Up to 12 mm in Belgium
• Up to 20 mm in Canada

For 130 years everything has revolved around warp and weft, and throughout the process a variety of woven wire cloth has been created, which will continue to grow with every new challenge in the future and truly leaves nothing to be desired.

Bonding

Sealing, protection, edging or insertion

For the production of pre-tensioned screen sections, the wire mesh is glued to the screen frame, e.g. under pre-tension. If required, the adhesive is food compliant according to VO (EG) No. /, heat or acid resistant or suitable for the use of ultrasonic systems.

Forming and hooking

Every detail counts when it comes to hook strips

At first glance, hooking of wire cloth seems rather simple. However, the example of screen sections makes the complexity clear. This is because forming and hooking of screening mesh has a direct influence on:

1. The service life of the screen section
2. The installation and tensioning of the screen section
3. The leak densitiy in the screening machine

Why is the cleaning of wire cloth filters so important in medical technology?

Wire cloth chips in medical technology? Loose wires are unthinkable in this industry. That is why we clean our filter elements made of metal wire cloth particularly intensively.

For example, inhaler screens are cleaned in several steps:

• Wire mesh cleaning
• Degreasing edged parts
• Ultrasound cleaning
• Screening

More about medical technology products

Contact us to discuss your requirements of Deep Processing Woven Wire Mesh. Our experienced sales team can help you identify the options that best suit your needs.